| Got an extra dollar? Why not donate it to this website. All donations are used to support this website, forum and for future video projects. Thank you for your Support |
| Donate $1 |
Marc
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 |
| |
 |
| |
 |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Specifications:
Length: 840mm
Height: 310mm
Main rotor diameter: 970mm
Tail rotor diameter: 200mm
Motor pinion gear: 13T
Main drive gear: 162T
Tail drive gear: 31T
Drive gear ratio: 1:12.46:4.68
Weight (without power system): 1370g
Flying weight: Approx 1700g
Length: 840mm
Height: 310mm
Main rotor diameter: 970mm
Tail rotor diameter: 200mm
Motor pinion gear: 13T
Main drive gear: 162T
Tail drive gear: 31T
Drive gear ratio: 1:12.46:4.68
Weight (without power system): 1370g
Flying weight: Approx 1700g
| Parts Needed to Build The Kit |
| The HK 500GT is a kit, you will need to purchase all the electronics separately (including blades). But this will allow you to build this heli to suit your budget. Here is what I plan to use. |
| Transmitter I will be using my Spektrum DX6i |
| LiPo Battery |
| Brushless Motor |
| Brushless ESC |
| Head Holding Gyro There are lots of HH gyros available. I plan on using the Futaba GY401. Be sure to use a good tail servo with this gyro. |
| Receiver I will be using a Spektrum AR6200 Rx on mine. |
| Tail Servo You need a fast tail servo. So I will be using a Futaba 9257 Servo |
| The ESC I am using does not include a BEC so I will be using this seperate TURNIGY 5-7.5A (8~42v) HV UBEC |
| BEC |