| HK 250 |
Parts Needed to Build The Kit
The HK 250 is a kit, meaning it does not come
with any electronics. There are many choices
for electronic parts, so here are the basic parts
you will need.
with any electronics. There are many choices
for electronic parts, so here are the basic parts
you will need.
| Transmitter I use the DX6i, a great transmitter at a good price. |
| Brushless Motor |
| Brushless ESC Get at least a 15A ESC. I will be using this 18-20A SuperSimple ESC from Hobbycity |
| Head Holding Gyro There are lots of HH gyros available. A good one will make life easier. But it needs to be small. |
| (4) Micro Servos I will be using these Turnigy 9gE servos. from Hobby King |
| LiPo Battery Here is a good battery, the Zippy 11.1V 800mAh from Hobby King |
Specifications:
Length: 430mm
Height: 187mm
Main Blade Length: 200/205mm
Main Rotor Diameter: 450/460mm
Tail Rotor Diameter: 108mm
Weight(w/o power system ): 138g
Length: 430mm
Height: 187mm
Main Blade Length: 200/205mm
Main Rotor Diameter: 450/460mm
Tail Rotor Diameter: 108mm
Weight(w/o power system ): 138g
| Receiver You will need a small receiver for this heli, something like the AR6100 from Spektrum |
| Got an extra dollar? Why not donate it to this website. All donations are used to support this website, forum and for future video projects. Thank you for your Support |
| Donate $1 |
Marc
| HK T250 |
| HK 250GT |
I picked up the HK T250 because I couldn't resist trying it out. Its listed to be an exact clone of the T-Rex
250. And at a low price of only $30, I just had to see what it was like. When I got it I was really impressed
at how nice the kit was and how many parts were in fact metal (including the frame). Because this is a
cheap $ clone, expect there to be some small issues with the kit but you can't expect much for only $30. I
still like mine very much and intend on upgrading only a few parts. I want to keep my build cheap $.
250. And at a low price of only $30, I just had to see what it was like. When I got it I was really impressed
at how nice the kit was and how many parts were in fact metal (including the frame). Because this is a
cheap $ clone, expect there to be some small issues with the kit but you can't expect much for only $30. I
still like mine very much and intend on upgrading only a few parts. I want to keep my build cheap $.
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 |
| |
 |
| |
 |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 |
| |
 |
| |
 |
| |
 |
 |
| |
 |
| |
 |
| |
 |
| |
 |
